Check all parts for obvious defects in accordance with standard industry practices.

Safety the clamp block across the control lever forks with safety wire.

The precision of the adjustment can change.

All text shall be prepared in one or two columns with justification at the discretion of the manufacturer; however, two columns are preferred for ease of reading.

Overhaul of any or all components in this chapter must be accomplished in a qualified shop in accordance with data supplied by the component manufacturer.

The manufacturer will have the option to include Time Limits/Inspections and Maintenance Checks in a separate manual, providing they are also placed in the Maintenance Manual.

在模拟高度时，确保ATC应答机处于备用状态， 否则可能会意外地产生虚假的TCAS目标。

查阅飞机记录本的故障记录以及中央DU或CDU上的相关故障信息，听取机组反映的故障, 报告故障并处理。

如果杆端轴承的径向磨损大于0.010英寸，在接下来的10个飞行循环或25个飞行小时内（先到为准）将其报废。

These ALIs are mandatory and cannot be changed or deleted without the approval of the FAA office that is responsible for the airplane model Type Certificate, or applicable regulatory agency.

Revisions, additions and deletions shall be identified by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.