The originators of the change forms are usually notified of the related STEMG assessments and decisions.
答案解析
解析：
接下来，让我们通过一个生动的例子来帮助你更好地理解。假设你是一个公司的项目经理，需要提出一个关于项目变更的表格。当你提交这个变更表格后，你会被通知相关的评估小组（STEMG）来评估这个变更，并做出决定。你会被告知他们的评估和决定结果，而不是被要求参与评估和表决。这样你就能更清楚地理解为什么正确答案是B了。
相关知识点：
变更发起者被通知评估决定
相关题目
Route segment is a part of a route, each end of which is identified by: a geographical location; or a point at which a definite radio fix can be established.
Propeller Governor is the device that regulates the rpm of the engine/propeller by increasing or decreasing the propeller pitch, through a pitch change mechanism in the propeller hub.
Turbine engine tachometers usually measure speed as a percentage of the maximum speed of the turbine(s), unless specifically referred to the propeller.
The exhaust gas temperature indicator, on piston engine powered airplanes, is the instrument used to identify the lean fuel flow mixtures for various power settings.
Pressure Altitude refers to altitude measured from standard sea level pressure (29.92 in. hg.) by a pressure or barometric altimeter. It is the indicated pressure altitude corrected for position and instrument error. In this Handbook, altimeter instrument errors are assumed to be zero.
Airplane certification conditions include one engine becoming inoperative and windmilling (or, in airplanes with autofeathering devices, feathered), not more than a 5° bank toward the operative engine, takeoff power on the operative engine, landing gear up, flaps in the takeoff position, and the most critical C.G.
Wing and power loading is based on the Maximum Takeoff Weight and the Takeoff Horsepower Rating and the Wing Area.
Pilots Operating Handbooks are appropriate on airplanes having a certification basis of FAR 23 except Commuter Category.
This handbook includes the material required to be furnished to the pilot by the federal aviation regulations and additional information provided by the manufacturer and constitutes the FAA approved airplane flight manual.
Those units and components which furnish a means of supporting and steering the aircraft on the ground or water, and make it possible to retract and store the landing gear in flight. Includes brakes, wheels, floats, doors, shock struts, tires, linkages, position indicating and warning systems.
