相关题目
8.客户的二台交换机SWA、SWB通过七根以太网线连接在一起, 并配置了动态链路聚合, 交换机SWA上对应端口Ethe rnet 1/0/1、Ethernet 1/0/2、Ethernet 1/0/3、Ethernet 1/0/4、Ethernet 1/0/5、E the met 1/0/6、Ethernet 1/0/7.如果交换机SWA、SWB每个聚合组只支持6个端口, 且SWA交换机有如下配置:
[SWA] interface Ethernet 1/0/ 7
[SWA-E the met 1/0/7] lacp port-priority 4096
在设备上查看LACP状态, 输出信息如下:
[SWA] display lacp system-id
7.客户的二台交换机SWA、SWB通过七根以太网线连接在起, 并配置了静态链路聚合, 交换机SWA上对应端口为Ethernet 1/0/1、Ethernet 1/0/2、Ethernet 1/0/3、Ethernet 1/0/4、Ethernet 1/0/5、Ethernet1/0/6、Ethernet 1/0/7, 配置方式为按照端口顺序依次配置。如果交换机SWA、SWB每个聚合组只支持6个端口,则( )
6. 二台交换机SWA、SWB通过四根以太网线连接在一起, 其中交换机SWA上对应接口有如下配置:
[SWA-Ethernet 1/0/1] display this
duplex full
speed 10
[SWA-Ethernet 1/0/2] display this
duplex full
speed 10
[SWA-Ethernet 1/0/3] display this
duplex half
speed 100
[SWA-Ethernet 1/0/4] display this
duplex half
speed 100
从上述信息可以得知( )。
5. 二台交换机SWA.SWB通过四根以太网线连接在一起, 其中交换机SWA上对应端口为Ethernet 1/0/1、Ethernet 1/0/2、Ethernet 1/0/3、Ethernet 1/0/4。在SWA上对此4个端门配置了静态链路聚合。从上述信息可以得知( )
4.在动态聚合模式下,默认的LACP系统优先级为( )。
3.某公司采购了A、B 两个厂商的交换机进行网络工程实施。需要在两个厂商的交换机之间使用链路聚合技术。经查阅相关文档,得知A 厂商交换机不支持LACP 协议。在这种情况下,下列哪项配置方法是合理的?( )
2.关于切换链路聚合模式,正确的命令表达是( )
1.LACP(链路聚合控制协议)是指( )。
3.3 链路聚合部署实施
6.端口安全模式macAddressOrUserLoginSecure下,端口同时处于userLoginSecure模式和macAddressWithRadius模式,但MAC地址认证认证优先。( )//802.1X认证优先
