436、Use an equivalent material if the specified one is not available.

887、This Section shall describe the airplane in a manner considered by the manufacturer to be most informative to the kind of pilot considered most likely to operate the airplane.

886、There is one rigid bus assembly located at the rear of each of the power distribution panels

885、The user of the schematic diagram is the mechanic.

884、The trailing edge flaps up limit switch sends flap position data to SMYD.The SMYD uses this during yaw damping to limit rudder movement when flaps are up

883、The signal must be given in such a precise way that the pilot cannot confuse.i

882、The scratch does not penetrate the protective layer.

881、The ratio of width to depth must be 30 or more at each point.

880、The navigation lights change from dim to bright.

879、The minimum time between checks is two minutes.

878、The minimum jack closed height must be less than the distance between the fitting and the ground when the aircraft is on its wheels: