278、The procedures should address how often the program will be reviewed to determine if it is current and adequate for the type of maintenance being performed at the facility.

1045、参考下表以获得适用的扭矩值。

1044、Make sure that the position of the clamp agrees with the position that you recorded during the removals procedure.

1043、The internal horn turns ON and stays ON as long as the detector has power and the smoke sensor detects smoke.

1042、在切口上粘贴第一层胶带,再呈对角线粘贴第二层和第三层胶带。

1041、安装天线时,对齐箭头必须朝前。

1040、A value of 0.5in is permitted.

1039、All text shall be prepared in one or two columns with justification at the discretion of the manufacturer, however, two columns are preferred for ease of reading.

1038、If desired, the manufacturer may include more than one airplane model in the Maintenance Manual.

1037、涡轮通过减速齿轮转动,向轴施加扭矩,从而驱动发动机和飞机附件。

1036、Note is an operating procedure, inspection,repair or maintenance condition, etc , which is deemed essential to highlight.