926、 It Bis expected that the manufactures of major components will provide maintenance, troubleshootinginspection and repair data in the format of this specification.希望主要部件的制造商按照本规范的格式提供维护、故障排除、检查和修理数据。

562、Install the manifold.

561、Incorrect adjustment of the stop bolts on the rudder pedals can causedamage.in

560、In this configuration, the hydraulic pressure bypasses the valve.

559、In the event a page must be added after the initial printing, use the number of preceding page with a letter suffix addedfor the added page ( )(e. g page Tle6A,1-6B,etc).as

558、In the alternative; the acronym CAP may be used.

557、In addition, this section may contain a comprehensive list of equipment available for installation by the manufacturer.

556、If you see discoloration, replace the part.

555、If you push the LSK that is adjacent to EXIT, then the BITE will take you out of BITE tests and put the airplane back to itsusual condition

554、If you cannot remove a bolt because of corrosion, apply penetrating oil.

553、If there are metal particles in the oil filter, examine the filter element for wear.