323、将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时，烤箱温度为 225 到 275华氏度(107 to135C).

Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275F(107 to 135C) for a minimum of one hour.

Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275F(1070to 135C) for amaximum of one hour.

All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275F(107to 135 C) for a minimum of one hour.

正确答案：A

1166、找出损伤类型和尺寸。

1165、确保近地警告系统可以工作

1164、Manufacturers may omit systems not applicable to their product.

1163、To bleed the braking system operate the hand pump handle through its full travel.

1162、The definitions used in a particulars Handbook should be appropriate for that particular airplane or installation.

1161、如果电缆扭曲,断开两个电插头。

1160、On the ground it provides a fixed relationship between the side stick controller angle and the elevator deflections:

1159、Engine driven pumps are primary pumps which run continuously when they are turned on.

1158、确保地面勤务车的排气不会造成错误的指示。

1157、Is late the defective ＇portion of the circuit.

323、 将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时，烤箱温度为 225 到 275华氏度(107 to135C).