179、Overhaul of any or all components in this chapter must be accomplished with data supplied by thecomponent manufacturer

1310、Always keep the brightness control on the LCD display at maximum.

1309、All two bracket holes must align with the fuel tube.

1308、Keep personnel away from the aircraft when the thrust reverser deploys.

1307、It is mandatory to do this procedure in this service bulletin

1306、It is expected that the manufactures of major components will provide maintenance, troubleshooting inspection andrepair data in the format of this specification.

1305、Install the O-ring in the internal groove of the spherical bearing

1304 、 The document points out that the FAA should be contacted prior to any alterations on airplane to insure thatairworthiness of the airplane is not violated.

1303、Make sure that the door is flush with the adjacent surfaces.

1302、Gauges used to indicate lower pressures use a more flexible tube that uncoils and coils more readily.

1301、This CAP has been prepared with the intent to expand present inspection requirements as a further assurance of theability of the airplane to perform within the limits of the originals certification