946、Maximum landing gear operating speed is the maximum speed at which the landing gear can be safely
extended or retracted 最大起落架工作速度是起落架可以安全伸展或收放的最大速度

328、Make sure that the movement of the elevators is slow.

327、If the left CMC fails, automatic switching occurs so that the right CMC provides the outputs.

326、 The surface contour of a repair in a 3- inches radius from the centerline of a static port does not have
an error of more than 0.007 inch.

325、对于词汇表,只有主要的变化被突出显示,对各种已批准和未批准的示例的微小更改没有突出显示。

324、 To prevent unwanted friction, polish the surface.

135C) for a minimum of one hour.

323、 将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时,烤箱温度为 225 到 275
华氏度(107 to135C).

322 、 In 1944, the British Civil Airworthiness Requirements was developed to form the code of the

321、Tighten the bolts manually if you cannot do it with the specified tool. 如果不能使用指定的工具手动紧
固螺栓。

320 、 This Section should contain a recommendation that airplane operator establishes contact with the
dealer or certified service station for service and information.