A、 Each manufacturer is expected to abide by the Specification content and arrangement without any
deviation in order to reasonably achieve the objectives of this Specification (enhance safety, reduce efforts,
minimize costs).
B、 It is mandatory that each manufacturer adhere to the Specification content and arrangement to achieve
the objectives of this Specification(enhance safety, reduce efforts, minimize costs).
C、 Each manufacturer,is expected to adhere ( 坚 持 ) to the Specification content and arrangement
reasonably so as to enhance safety, reduce efforts, and minimize costs which are the objectives of thisSpecification.
答案:C
A、 Each manufacturer is expected to abide by the Specification content and arrangement without any
deviation in order to reasonably achieve the objectives of this Specification (enhance safety, reduce efforts,
minimize costs).
B、 It is mandatory that each manufacturer adhere to the Specification content and arrangement to achieve
the objectives of this Specification(enhance safety, reduce efforts, minimize costs).
C、 Each manufacturer,is expected to adhere ( 坚 持 ) to the Specification content and arrangement
reasonably so as to enhance safety, reduce efforts, and minimize costs which are the objectives of thisSpecification.
答案:C
A. 该部件中的空气循环使得特定部件的温度不超限。
B. 某些部件的温度不超限因此该部件中的空气能够流动。
C. 该部件中的空气的旋转和特殊部件的温度均不超限。
A. lf liquid spills in the kitchen, all traces of the liquid must be cleaned promptly, and the concerned area
must be completely dry.
B. if liquid spillen inside the galley ,you must remove all signs of liquid and fully dry the areas of contamination immediately.
C. lf liquid spills in the galley, all marks of the liquid must be removed at once and the polluted area must be
completely dried.
A. Be sure that the clamp is positioned together with those you removed
B. Make sure that the position4of the clamp corresponds toa the position recorded during the removal
procedure.
C. The position of the clamp should be aligned with the position of the clamp that you removed.
A. 如果跳开关拔出,则断开电路
B. 如果跳开关闭合,则断开电路
C. 如果跳开关拔出,测接通电路
A. 如果维护消息未在"电流状态"中显示,则出现了连续性故障
B. 如果维护信息未在"当前状态中显示,则出现了间歇性故
C. 如果维护消息未在"当前状态"中显示,则出现了次级故障。
A. The coating thickness must be more than 0.05mm and less than 0.06mm.
B. The thickness of the second coating layer must be 0.05mm and 0.06mm
C. The thickness of primer layer must be between 0.05 mm and 0.06 mm.
A. Among the offices under the Associate Administrator is the Aircraft Certification Service, which has the
responsibility for overseeing the Aircraft Certification Directorate, and the is Washington Headquarters
operations related design, production, and airworthiness certification.
B. Aircraft Certification Directorate which is one of the offices under the Associate Administrator is
responsible for overseeing the Aircraft Certification Directorate, and the Washington Headquarters
operations related to design production, and airworthiness certification.
C. Overseeing the Aircraft Certification Directorate, and the Washington Headquarters operations related to
design, production, and approval is the duty of Aircraft Certification Service that is among the offices under
the Associate Administrator.
A. 包含大写字母加名词或数字加名词的术语,通常用于描述某物的形状或结构。
A. A mixture of fuel and oxygen can cause an explosion
B. A mixture of fuel and nitrogen can cause an burn.
C. A mixture of gas and oxygen should cause an explosion.
A. The SMYD1 will limit rudder movement when flaps are up if trailing edge flaps receive data :from up limit
switch of SMYD1 during yaw damping