323、将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时,烤箱温度为 225 到 275
华氏度(107 to135C).

　 Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275F(107 to 135C) for a minimum of one hour.

　 Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275F(1070to 135C) for a maximum of one hour.

　 All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275F(107 to 135 C) for a minimum of one hour.

答案解析

正确答案：A

噜啦啦噜啦噜啦啦2

扫码进入小程序
随时随地练习

相关题目

单选题

950、Move the lever rearward

单选题

949、most secondary structures are important to the performance of the airplane

单选题

948、Most of the switches you use to control the electrical power system are on the electrical system control
panel.
大多数用来控制电力系统的开关都在电力系统控制面板上。

单选题

947、 Mechanical power is produced by electric motors that are mainly used to drive pumps, for example,
fuel and hydraulic pumps or to drive ‘a valve to the commanded position in the fuel, hydraulic or air
conditioning system or to move mechanical parts like doors and cargo containers. 机械动力是由电机产生的,
主要用于驱动泵,例如燃料泵和液压泵,或驱动阀门到燃料、液压或空调系统的命令位置,或移动机械部
件,如门和货物集装箱。

单选题

946、Maximum landing gear operating speed is the maximum speed at which the landing gear can be safely
extended or retracted 最大起落架工作速度是起落架可以安全伸展或收放的最大速度

单选题

945、 Make sure that there is no dust on the surface

单选题

944、make sure that there is no blockage in the pipe 确保管道中没有堵塞

单选题

943、Make sure that the position of the clamp agrees with the position that you recorded during the removal
procedure.
确保夹具的位置与您在拆卸过程中记录的位置一致。

单选题

942、Make sure that the latch is fully engaged.

单选题

941、Make sure that the landing-light cutoff switch power connection is safe