352.INSTALL CAPS ON THE RECEPTACLES TO MAKE SURE THAT UNWANTED MATERIAL
A. GET INTO
B. GO INTO
C. ENTER
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d4-cd58-c0f5-18fb755e8800.html
点击查看答案
390.If you cannot push a needle or equivalent through the inspection hole,
then rod eye is deep enough.
A. 如果不能将针或校准销推入检查孔,则表示杆眼足够深。
B. 如果不能将针或检查销推入检查孔,则表示杆眼足够深。
C. 如果不能将针或类似物推入检查孔,则表示杆眼足够深。
https://www.shititong.cn/cha-kan/shiti/0005f3d5-4f15-7c28-c0f5-18fb755e8800.html
点击查看答案
549.Copy density shall be uniform throughout the page.
A. Copy density should be the same throught the page.
B. Copy density must be different throught the page.
C. Density of copy must be different throught the page.
https://www.shititong.cn/cha-kan/shiti/0005f3d5-4f16-56e8-c0f5-18fb755e8802.html
点击查看答案
145.结构部分被分为三组。
A. The content of the structure are divided in three groups.
B. The parts of the construction are divided into three set.
C. The parts of the structure are divided into three groups.
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d3-94d8-c0f5-18fb755e8802.html
点击查看答案
485.Each item of Airplane Performance shall include a statement of
significant conditions associated with the data.
A. 飞机性能中至少一项应包括与数据有关的重要条件的说明。
B. 飞机性能的每一项应包括与数据有关的重要条件的说明。
C. 飞机制导的每一项应包括与数据有关的重要条件的说明。
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d5-88d8-c0f5-18fb755e8802.html
点击查看答案
554.Remove all sealant that is around the hole.
A. 移动所有孔周围的密封胶。
B. 清除孔周围的所有密封胶。
C. 检查所有密封胶圈绕着孔。
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d5-e698-c0f5-18fb755e8801.html
点击查看答案
601.If you cannot push a needle or equivalent through the inspection hole,
then rod eye is deep enough.
A. 如果不能将针或校准销推入检查孔,则表示杆眼足够深。
B. 如果不能将针或检查销推入检查孔,则表示杆眼足够深。
C. 如果不能将针或类似物推入检查孔,则表示杆眼足够深。
https://www.shititong.cn/cha-kan/shiti/0005f3d5-4f16-a8f0-c0f5-18fb755e8800.html
点击查看答案
552.IF THE FLAP EXTENSION DOES NOT( ) WITH THE POSITION OF THE FLAP CONTROL
LEVER, DO THE RIGGING PROCEDURE AGAIN.
A. UNIFY
B. CONFORM
C. AGREE
https://www.shititong.cn/cha-kan/shiti/0005f3d5-4f16-5eb8-c0f5-18fb755e8800.html
点击查看答案
764.Removal/Installation、 The removal/installation portion shall state
clearly the sequence of steps required to remove and reinstall a component
or unit, along with precautions to be observed.
A. 拆/装、拆卸/安装部分应清楚说明拆卸和安装部件或组件所需的步骤顺序,以
及遵循的预防事项。
B. 拆装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件所需的步骤顺序,
以及要遵守的预防措施。
C. 拆/装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件以及遵循的预防
事项所需的步骤顺序。
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d7-2300-c0f5-18fb755e8802.html
点击查看答案
169.If the adjustment of the stops is not correct, the results of the
test will not be accurate.
A. 如果调节止动不正确,测试结果将不准确。
B. 如果调节止动未修正,测试结果将不准确。
C. 如果止动点的调整不正确,测试结果将不准确。
https://www.shititong.cn/cha-kan/shiti/0005f3fe-c6d3-b800-c0f5-18fb755e8801.html
点击查看答案