566.MAKE SURE THAT THE TRANSPONDER ( ) THE SIGNAL CORRECTLY.

A. 　You can use electric motors to drive fuel and hydraulic pumps or to
drive a valve to the commanded position in the fuel,hydraulic or air
conditioning system or to move doors and cargo containers.

B. 　Electric motor can drive fuel and hydraulic pumps or drive a valve to
the commanded position in the fuel,hydraulic or air conditioning system
or move mechanical parts like doors and cargo containers to produce
mechanical power.

C. 　Electric motor produce mechanical power and their main functions are
to drive fuel and hydraulic pumps,to drive a valve to the commanded
position and to move mechanical parts like doors and cargo containers.

A. 　操作程序、检查、修理或维护程序,如果不正确遵循,可能导致人身伤害或
生命损失。

B. 　操作程序、检查、修理,如果不正确遵循,可能导致人身伤害或生命损失。

C. 　操作程序、检查、修理或维护程序,如果不正确遵循,可能导致设备损伤或
损坏。

A. 　GOVERNED

B. 　REGULATED

C. 　CONTROLLED

A. 　A value of 2 mm is permitted.

B. 　A value of 2 mm is rejected.

C. 　A value of 2 mm is unacceptable.

A. 　When you need to understand a schematic diagram,use arrows to indicate
flow orienting.

B. 　Arrows shall be used to indicate flow ends when needed to understand
the schematic diagram.

C. 　When need to comprehend the chart,you should use arrows point to the
direction.

A. 　ensure that there are no loose component in the engine air intakes.

B. 　ensure that there are no loose dusts in the engine air intakes.

C. 　make sure that there are no loose objects in the engine air intakes.

A. 　 如果剪切销断裂,检查拖把。

B. 　 如果销钉断裂,检查拖把。

C. 　 如果剪切销断裂,给拖把做测试。

A. 　This action must not be done in the hangar.

B. 　Do not do this procedure in the hangar.

C. 　On the hanger,Don't do this procedure .

A. 　调节螺钉转动后,使压力平稳。

B. 　每次转动调节螺钉后,使压力稳定。

C. 　只要转动调整螺钉后,使压力稳定。

A. 　the lower seal comes into view when you pull the lower bearing down.

B. 　The lower seal shows as the lower bearing is pulled down.

C. 　The lower seal appears as the up bearing is pulled down.