A、 把这些部分中的每一个故障按概率的顺序列出。
B、 把这些部分按概率的顺序列在每个故障下面。
C、 把这些故障列在每个部分下面为了增加概率。
答案:B
A、 把这些部分中的每一个故障按概率的顺序列出。
B、 把这些部分按概率的顺序列在每个故障下面。
C、 把这些故障列在每个部分下面为了增加概率。
答案:B
A. 它们可以是活页格式,有一个耐磨的、多环的封面,临时装订,“胶片”或其
他适当的形式。
B. 它们可以是活页格式,有一个耐磨的、多环的封面,永久装订,“胶片”或其
他适当的形式。
C. 它们可以是固定页格式,有一个耐磨的、多环的封面,永久装订,“胶片”或
其他适当的形式。
A. Copy density should be the same throught the page.
B. Copy density must be different throught the page.
C. Density of copy must be different throught the page.
A. 该工具用于将钢索张力调节器上的标记与固定标盘上的相关指针对齐。
B. 该工具用于将钢索张力调节器上的标记与固定标盘上的相关刻度对齐。
C. 该工具用于将钢索弹簧调节器上的标记与固定标盘上的相关刻度对齐。
A. This material releases dangerous fumes when it touches hot surfaces.
B. On contact with hot surfaces, this material produces dangerous fumes.
C. This material happens dangerous gases when it comes into contact with
hot surfaces.
A. 用一条水平的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除, 该黑线只与印刷品的修改部分相对应。
B. 用一条竖直的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
C. 用一条横向的白线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
A. An appropriate caution or note shall be contained in each Handbook to
inform the operator that a current Handbook is required to be in the
airplane during flight and that it is the operator's duty to keep the
B. A current Handbook that an appropriate warning or note shall be obtained
in each Handbook to inform the operator is required to be in the airplane
during flight and that it is the operator's responsibility to retain the
C. A suitable warning or note shall be involved in each Handbook to inform
the operator that a current Handbook is required to be in the airplane
during flight and that it is the operator's responsibility to maintain
the Handbook in a current status .
A. 用一条水平的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除, 该黑线只与印刷品的修改部分相对应。
B. 用一条竖直的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
C. 用一条横向的白线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
A. The order of topics in the Handbook is intended to increase in-flight
usefulness.
B. The sequence of topics in the Handbook is intended to increase in-flight
useless.
C. The sequence of topics in the Handbook is pretended to increase
in-flight usefulness.
A. 因 CAP 是针对特定的零件或部件,可得知检查将包括对零件和设备周围区域
的观察和评估。
B. 由于 CAP 是针对特定的零件或部件,可推测出检查将包括对零件和设备周围
区域的观察和评估。
C. 只要 CAP 是针对特定的零件或部件,就意味着检查将包括对零件和设备周围
区域的观察和评估。
A. Distances shown are based on weak wind.
B. Distances shown are developed with no wind.
C. Distances shown are on the basis of gentle wind.