A、 The fueling hose must not hit the side of the tank.
B、 The fueling hose must not hit the edge of the tank.
C、 The fueling hose must not bond the edge of the tank.
答案：B
A、 The fueling hose must not hit the side of the tank.
B、 The fueling hose must not hit the edge of the tank.
C、 The fueling hose must not bond the edge of the tank.
答案：B
A. to arrive at the incorrect value, set the switch to position 2.
B. to get the correct value, set the switch to position 2.
C. to get the incorrect value, set the switch to position 2.
A. This handbook includes the documents required to be finished to the
pilot by the federal aviation regulations and additional information
approved by the operator and contains the FAA approved airplane flight
manual.
B. This handbook includes the material required to be furnished to the
pilot by the federal aviation regulations and additional information
provided by the manufacturer and constitutes the FAA approved airplane
flight manual.
C. This aviation regulations,material provided to pilots and accurate information
provided by the manufaactures,and establishes the FAA approved airplane
flight manual.
A. Both master schematic diagrams and system function of complex systems
should be for simplicity of presentation and understandability.
B. Complex systems should be divided into system function but not overall
master schematic diagrams for homeliness and a better understanding of
presentation.
C. For simplicity of presentation and understandability, complex systems
should be divided into either system function or overall master schematic
diagrams.
A. If there is hum from the loudspeaker,don't adjust the potentiometer.
B. Adjust the potentiometer unless hear a hum from the loudspeaker.
C. Adjust the potentiometer until the loudspeaker no longer hums.
A. 维修手册中准备某些章节的技术数据需要机身制造商和各种其它部件制造商
之间的共同贡献和密切协作。
B. 编写维修手册某些章节的技术资料时,需要机身制造商和各种其他部件制造
商之间的共同协作。
C. 机身制造商和各种其他部件制造商可以共同协作以完成维修手册,一些章节的
技术参数的编写工作。
A. COMES
B. GOES
C. DISPLAYS
A. Adjust the clinometer until the bubble is in the center.
B. Adjust the thermometer until the bubble is in the center.
C. Adjust the hygrometer until the bubble is in the center.
A. Maximum Landing Weight is maximum weight approved for the landing
touchdown.
C. Maximum Landing Weight is minimum weight provided for the landing
touchdown.
A. Adjust compass system 1 until it agrees with compass system 2.
B. Synchronize compass system 1 with compass system 2.
C. Regulation compass system 1 until it agrees with compass system 2.
A. When you need to understand a schematic diagram,use arrows to indicate
flow orienting.
B. Arrows shall be used to indicate flow ends when needed to understand
the schematic diagram.
C. When need to comprehend the chart,you should use arrows point to the
direction.
