A、 The rest information could be shown on the cover plate
B、 Other information may be displayed on the cover.
C、 The cover will show the other information.
答案：B
A、 The rest information could be shown on the cover plate
B、 Other information may be displayed on the cover.
C、 The cover will show the other information.
答案：B
A. 这两个小组探索了现有的受控语言,并研究了一些维护手册中的文本。结果证实单一语言是必要的。
B. 这两个小组分析了现有的可控语言,并研究了一些维护手册中的文本。结果证实简单的语言是必要的。
C. 这两个小组研究了现有的受控语言,并调查了一些维护手册中的文本。结果证实简化的语言是必要的。
A. 控制组件的出口压力值,否则它不能稳定在正确压力范围。
A. 始终遵守如下保持电线处于良好状况的法规
B. 始终遵守预防措施,然后保持电线处子良好状况
C. 始终遵守如下预防措施以保持电线处于良好状况
A. 显示连接点的位置,转弯半径的图解应包括在内。
B. 附着点的位置和转弯半径应包括插图。
C. 插图显示连接点的位置还包括转弯半径。
A. Peel the coating from the harness.
B. Strip the insulation from the wire.
C. Stripe the insulation from the harness.
A. Each manufacturer is expected to abide by the Specification content and arrangement without any
deviation in order to reasonably achieve the objectives of this Specification (enhance safety, reduce efforts,
minimize costs).
B. It is mandatory that each manufacturer adhere to the Specification content and arrangement to achieve
the objectives of this Specification(enhance safety, reduce efforts, minimize costs).
C. Each manufacturer,is expected to adhere ( 坚 持 ) to the Specification content and arrangement
reasonably so as to enhance safety, reduce efforts, and minimize costs which are the objectives of thisSpecification.
A. 确保表面没有铁锈
A. 表格遵循以下显示的数据。
B. 以下表格显示该数据。
A. Lock the air inlet valve in the fully open position unless the air inlet flap is not serviceable.
B. lf the air intake flap is not serviceable, lock the air inlet valve in the fully open position
C. Once the air intake flap is serviceable lock the air inlet valve in the fully open position.
A. 变更一些词性的缩写,使其与标准缩写一致。
B. 一些词性缩写的变化与标准缩写一致。
C. 更新标准缩写使其满足一些词性缩写变更的要求。
