相关题目
750、There is one rigid bus assembly located at the rear of each of the power distribution panels
749. The user of the schematic diagram is the mechanic.
748、The trailing edge flaps up limit switch sends flap position data to SMYD1.The SMYD1 uses this during
yaw damping to limit rudder movement when flaps are up 后缘襟翼上限位开关将襟翼位置数据发送到
SMYD1。当襟翼升起时,SMYD1 在偏航阻尼过程中使用这一点来限制方向舵运动
747、The signal must be given in such a precise way that the pilot cannot confuse.
信号必须以如此精确的方式发出,以免飞行员混淆。
746、The scratch does not penetrate the protective layer
745、 The ratio of width to depth must be 30 or more at each point.
744、 The navigation lights Change from dim to bright.
743、The minimum time between checks is two minutes.
742、The minimum jack closed height must be less than the distance between the fitting and the ground
when the aircraft is on its wheels、
741 、 The material within subparagraph of Handbooks may follow the order of material within
subparagraphs of this Section of the Specification or may be arranged to suit a particular type or model of
airplane.
