A、 Replace broken clamp with new clamp with reference to standard practices and AMM and relieve rubbing with the bundle at floor bar cut at body station 360.
B、 Replaced broken clamp with a new clamp diminishing rubbing at floor beam cutout at body station 360 with reference to standard practices and AMM.
C、 According to the standard practices and AMM, the damaged clamp at the body station 360 was replaced to eliminate the friction between the wire bundle and the cutout of the floor beam at this place.
答案：C
A、 Replace broken clamp with new clamp with reference to standard practices and AMM and relieve rubbing with the bundle at floor bar cut at body station 360.
B、 Replaced broken clamp with a new clamp diminishing rubbing at floor beam cutout at body station 360 with reference to standard practices and AMM.
C、 According to the standard practices and AMM, the damaged clamp at the body station 360 was replaced to eliminate the friction between the wire bundle and the cutout of the floor beam at this place.
答案：C
A. 如果你将上阻力杆的头部安装在下部，它会在作动时碰撞到下阻力杆。
B. 如果安装上阻力杆时将其倒置，在收起时它会碰撞到下阻力杆。
C. 将上阻力杆倒置，使其在放出时与下阻力杆相连。
A. Replace the defective booster pump.
B. Remain the present booster pump.
C. Recharge the failed booster pump.
A. 清洁容器的内表面。
B. 清洁包括表面在内的容器。
C. 从里清洁容器表面。
A. 检查单可能需要增加额外的信息，以便飞行员更好地理解检查单中的措施。
B. 检查单后面可能还有附加的信息，以便飞行员更好地理解怎样实施检查单。
C. 检查单后面可能还有附加的信息，以便飞行员更好地理解检查单中措施的原因。
A. 给机械工分配不同的维修任务。
B. 给工程人员分配不同的操作任务。
C. 给技术人员分配不同的维修任务。
A. Make sure that the scale is not more than 400 knots.
B. Make sure that the indication is not more than 400 knots.
C. Make sure that the indication is not more than 400 miles.
A. Collect all maintenance records for the part PNxxxx.
B. Compile all maintenance logs for the component PNxxxx.
C. Collect all flight logs for the component PNxxxx.
A. Explaining how to obtain the maximum ground miles per gallon through careful flight planning and attention to good operating procedures is the primary content.
B. Display how to achieve the main objective to get the greater ground miles per gallon by careful flight planning and attention to good operating procedures.
C. The principal purpose is to show how to increases the ground miles per gallon as much as possible with careful flight planning and attention to good operating procedures.
A. The distribution system is used to store and distribute air pressure.
B. Distribution system is used to induct and distribute air.
C. Air inlet system is used to distribute air to all systems.
A. Do not install 0.1 mm thick shims.
B. Do not install shims which are more than 0.1 deep.
C. Do not install shims that are more than 0.1 mm thick.
