A、 If the microswitch stops working,deactivate the procedure of the actuator to avoid the valve damage.
B、 If the microswitch becomes unserviceable,do the activation procedure of the actuator to prevent damage to the valve.
C、 Do the activation procedure of the actuator to prevent damage to the valve,unless the microswitch becomes unserviceable.
答案:A
A、 If the microswitch stops working,deactivate the procedure of the actuator to avoid the valve damage.
B、 If the microswitch becomes unserviceable,do the activation procedure of the actuator to prevent damage to the valve.
C、 Do the activation procedure of the actuator to prevent damage to the valve,unless the microswitch becomes unserviceable.
答案:A
A. 为了给支持性软件产品的组织、公司和个人提供担保或认可,ASD、简化技术英语维护集团(STEMG) 以及与 STE 生产相关的任何组织或公司将会提供培训或生产支持。
B. ASD、简化技术英语维护集团(STEMG)以及与 STE 生产相关的任何组织或公司均无意或暗示对提供培训或生产支持佳软件产品的组织、公司和个人提供任何担保或认可。
C. 简化技术英语维护集团(STEMG)与生产相关的任何组织,或公司均无意或暗示对提供培训或生产支持性软件卷刑的组组、公司和个人提供任何担保或认可,ASD 除外。
A. 液压油污染的主要原因是活门失效。
B. 活门失效的主要原因是液压油污染。
C. 液压油活门失效的的主要原因是污染。
A. Define any special grammars used in the Handbook with important on those which could be missioned or misunderstood.
B. Define any special terminologies used in the Handbook with emphasis on those which could be misused or misunderstood.
C. Identify any special terms used in the Handbook with the point on those that could be missed or misunderstood.
A. Divide the headwind component by the aircraft speed to get the correction
B. Divide the crosswind component by the air speed to get the correction.
C. Divide the crosswind component by the aircraft speed to get the correction.
A. Install the correct dump valve and the correct gasket.
B. Install the dump valve and the appropriate gasket.
C. Install the dump valve and the correct gasket.
A. 当电表显示28伏特直流时,断路器闭合
B. 当电表显示28伏特直流时,继电器闭合
C. 当电表显示28伏特直流时,电磁阀闭合
A. 顺时针方向转动螺栓。
B. 顺时针方向转动盖子
C. 逆时针方向转动盖子。
A. 应另提供排故信息,说明可能的故障,如何识别这些故障的方法以及故障的纠正措施
B. 故障排除信息描述可能发生的故障,应另提供如何识别这些故障的方法,以及针对这些故障采取的补救措施。
C. 故障排除信息描述可能发生的故障,应另提供如何识别这些故障的法,以及针对这些故障采取的有
效措施。
A. 根据收到的 CAP 检査报告来推测腐蚀的影响是非常困难的,但是,检査时长将根据发现的所有严重问题进行调整
B. 确定腐蚀的影响是非常困难的,但是,根据收到的 CAP 检査报告,检查次数将根据发现的所有严重问题进行调整
C. 确定影响腐蚀的因素是非常困难的,但是,根据收到的 CAP 检查报告,检査时间将根据发现的所有严重问题进行调整
A. 如果轮胎温度升高超过 177 度,插头熔化且轮胎放气。
B. 如果轮胎温度升高超过 177 度,易熔塞和轮胎融化。
C. 如果轮胎温度升高超过 177 度,易熔塞熔化且轮胎放气。