A、 If you get a minimum clearance of 0.1 in.,you can adjust the length of the rod.
B、 Do not adjust the length of the rod unless you get a minimum clearance of 0.1 in.
C、 Adjust the length of the rod until the minimum clearance is 0.1 in.
答案:C
A、 If you get a minimum clearance of 0.1 in.,you can adjust the length of the rod.
B、 Do not adjust the length of the rod unless you get a minimum clearance of 0.1 in.
C、 Adjust the length of the rod until the minimum clearance is 0.1 in.
答案:C
A. 喷油孔故障会导致不正确的操作。
B. 喷油孔堵塞会导致不正确的信息。
C. 喷油孔堵塞会导致不正确的操作。
A. The gearbox is installed behind the pneumatic motor.
B. the pump is installed behind the hydraulic motor.
C. The pump is installed behind the pneumatic turbine.
A. If you absolutely move the lever,set the system to the neutral position again.
B. If you accidentally move the lever,set the system to the neutral position again.
C. If you accurately move the lever,set the system to the neutral position again.
A. Make sure that there is no less than 500 liters of fuel in the tank.
B. Ensure that the amount of fuel in the tank is above 500 liters.
C. Make sure that the quantity of fuel in the tank is not more than 500 liters,
A. 简介中应包含主题的字母索引,用于定位重要的电路。
B. 字母表应按照主题分类后在简介中列出,用于定位理想电路。
C. 简介中应包含主题分类的字母索引,以帮助査找所需的电路。
A. You can use electric motors to drive fuel and hydraulic pumps or to drive a valve to the commanded position in the fuel,hydraulic or air conditioning system or to move doors and cargo containers
B. Electric motors can drive fuel and hydraulic pumps or drive a valve to the commanded position in the fuel,hydraulic or air conditioning system or move mechanical parts like doors and cargo containers to produce mechanical power
C. Electric motors produce mechanical power and their main functions are to drive fuel and hydraulic pumps,to drive a valve to the commanded position and to move mechanical parts like doors and cargo containers
A. 用直尺和游标卡尺测量凹痕深度。
B. 用直尺和塞尺测量凹痕深度。
C. 游标卡尺和塞尺测量凹痕深度
A. 这些平头螺母有一个法兰。
B. 这些螺母有一个平板法兰。
C. 这些螺母和法兰是平的。
A. If the temperature values are under the eligible limits,decrease the power.
B. Decrease the power as long as the temperature values are less than the certified limits.
C. Once the temperature values are more than the allowed limits,decrease the power.
A. 编写《维修手册》某些章节的技术资料时,需要机身制造商和各种其他部制造商之间的共同协作。
B. 《维修手册》中准备某些章节的技术数据需要机身制造商和各种其它部件制造商之间的项同贡献和密切协调
C. 机身制造商和各种其他部件制造商可以共同协作以完成《维修手册》一些章节的技术参数的编写工作。