22.In these conditions,neither the mechanical nor the electrical pitch trim systems will operate.

A. 　Deflate the system before you disconnect the components.

B. 　Bleed the system before you disconnect the components.

C. 　Bleed the system before you interrupt the components.

A. 　规范中包含一些新的材料和方法。

B. 　规范中几乎没有包含什么新材料或新方法。

C. 　规范中既不包含新材料,也不包含新方法。

A. 　ABC has determined the varied mission the airplanes performed, type of care given, and age
and utilization rates because providing additional inspection requirements is prerequisite to further ensure that the airplanes can continue to carry the design loads it was originally certified for based on inspections, tests, and analyses.

B. 　ABC has determined that providing additional inspection requirements is prerequisite to further ensure that the airplanes can continue to carry the design loads it was originally certified for based on inspections, tests, and analyses)because of the varied mission the airplanes performed, type of care given, and age and utilization rates.

C. 　further ensure that the airplanes can continue to carry the design loads it was originally certified for, owing to the diversified mission the airplanes performed, type of care given, and age and utilization rates, ABC has determined that providing additional inspection requirements is necessary based on inspections, tests, and analyses

A. 　涂上两层保护性化合物,防止液压油损害密封胶。

B. 　涂上两层保护密封胶,以防止液压油损害混合物

C. 　在无保护的表面涂上两层密封胶,防止液压油损害化合

A. 　如果摇晃了溶液,一小时不要使用。

B. 　如果摇晃了溶液,不要在一小时后使用。

C. 　如果摇晃了溶剂,不要在一小时内使用。

A. 　The objective of minimizing the cost to,and efforts of general aviation aiiplane owners and operators personnel is to develop the Specification by standardizing the foiTnat and general content of Continuing Airworthiness Programs

B. 　The purpose of developing the Specification is to minimize the cost to,and efforts of general aviation airplane owners and operators and maintenance personnel by the standardization of the format and general content of Continuing Airworthiness Programs

C. 　The aim of making the Specification is to standardizing the format and general content of Continuing Airworthiness Programs by minimizing the cost to,and efforts of general aviation airplane owners and operators and maintenance personnel

A. 　修正空速(CAS)仅为按需使用,以符合认证机构的任何对应要求,因为飞行员延程飞行时需按照指示空速(IAS)工作。

B. 　修正空速(CAS)仅在紧急情况时使用,以符合认证机构的任何对应要求,因为飞行员不能按照指示空速(IAS)I 作;

C. 　修正空速(CAS)仅在必要时使用,以符合认证机构的任何対应要求,因为飞行员完全按照指示空速(IAS)工作。

A. 　泵安装在 3 号翼肋,黑搓着前翼梁。

B. 　泵安装在 3 号翼肋,位于前翼梁的后部。

C. 　泵安装在 3 号翼粱,位于后翼肋的前面

A. 　顶升和支撑部分包括维护、大修和维修,拆卸和更换程序,以及比如腹部着地、机头着地等异常情况。

B. 　顶升和支撑部分包括维护、大修和维修程序,拆卸和更换以及比如腹部着地、机头着地等异常情况。

C. 　顶升和支撑部分包括维护程序,大修和维修,拆卸和更换,以及比如腹部着地、机头着地等异常情况。

A. 　”＇维修施工”包括维修、拆卸/安装、道应 Z 测试、检验/检查、清洁/喷漆和故障排除部分准的修理。

B. 　”维修施工”包括勤务、拆卸/安装、调节/测试、检验/检查、清洁/喷漆及批准修理,且遵循故障 排除部分。

C. 　”维修施工”包括维修、拆卸/重装、调节/测试、检验/检查、清洁/喷漆或故障排除部分准的修理。