1、SET THE SWITCH TO THREE CYCLES A MINUTE.
A. 设置电门每秒钟三个循环。
B. 设置电门每分钟三个循环.
C. 设置电门每三分钟三个循环。
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-0a38-c07f-52a228da6003.html
点击查看答案
31.The values must not be more than the approved differences.
A. The removal of the piston is involved in the steps.
B. The removal of the piston is not included in the procedure.
C. The procedure eliminates the piston.
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9b21-79c0-c07f-52a228da600d.html
点击查看答案
13.Lubricants for the engine and the auxiliary equipment are the same.
A. 发动机及其附件所用的润滑油是一样的。
B. 润滑发动机和辅助设备的方式是相同的。
C. 发动机的润滑和辅助设备是相同的。
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-21a8-c07f-52a228da601b.html
点击查看答案
14.Stagger the tab dividers and label them with section numbers or titles,or both.
A. 将分隔标签平行放置,并用节号或标题或两者一起标记。
B. 将分隔标签交错放置,并用节号或标题或两者一起标记。
C. 将分隔标签按顺序放置,并用节号或标题或两者一起标记
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-21a8-c07f-52a228da601c.html
点击查看答案
1、After the ailerons go back to neutral make sure that they are flush with the flaps.
A. 副翼回到中立位后,确保其与襟翼齐平。
B. 扰流板回到原位后,保证和襟翼对齐
C. 在副翼返回中心之后,保证它们和襟翼相连。
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-0e20-c07f-52a228da6001.html
点击查看答案
48.Move the tube to make the inner connection tight.
A. The intention to move the tube inside is to make tight connection.
B. Remove the tube to achieve a tight inner connection.
C. Move the tube to get the firm inner connection.
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9b21-75d8-c07f-52a228da6017.html
点击查看答案
15.If the manual is loose-leaf,each page should contain the date and effective revision date
whu revised,or otherwise be identified as to revision status.
A. 若为松散页,则每一页应注明修改日期和生效日期,或以其他方式标识修订状态。
B. 若为固定页,则每一页应注明修该日期和生效日期,或以其他方式标识修订状态。
C. 若为活页,则每一页应注明修订日期和生效日期,或以其他方式标识修订状态。
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-21a8-c07f-52a228da601d.html
点击查看答案
48.Even though large illustrations are laid out horizontally,it is preferred to have indexing callouts and titles read vertically.
A. 如果大型插图水平放置,索引批注和标题最好径向放置。
B. 尽管大型插图水平放置,索引标注和标题最好垂直放置。
C. 因为大型插图横向放置,索引标注和标题最好垂直放置。
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9a60-1dc0-c07f-52a228da6017.html
点击查看答案
53.When you install the part,make sure that the rounded edge is against the structure.
A. When the part is installed,make sure that the rounded edge is adjacent to the structure.
B. Make sure that the rounded edge leans opposite the structure when you install the part.
C. When you install the part,ensure that the rounded edge clings to the structure tightly.
https://www.shititong.cn/cha-kan/shiti/0005e7c1-9b21-75d8-c07f-52a228da6008.html
点击查看答案
42.提供给客户的所有技术数据中的术语应保持一致。
A. Nomenclature shall be similar throughout all technical data obtained by the Customer.
B. Nomenclature shall be consistent throughout all technical data given to the Customer.
C. Nomenclature must be similar throughout all technical data provided to the Customer.
https://www.shititong.cn/cha-kan/shiti/0005e7c1-99d3-c028-c07f-52a228da6013.html
点击查看答案
