相关题目
One key Standard Operating Procedure is the Approach Briefing. All crew members must understand what is planned for on the approach and must be involved during the discussion of the plan. Both horizontal and vertical position awareness elements need to be established. The Flight Safety Foundation recommends that in addition to the standard briefing items such as: ? chart date ? runway in use ? approach type ? glideslope angle and ? crossing altitudesThe following items should be briefed as appropriate: ? automation setup and usage ? navigation equipment setup and monitoring ? rate and angle of descent ? intermediate altitudes and call outs ? altitude alert settings and acknowledgements ? approach gates ? timing ? runway environment ? lighting ? expectations when going visual to include: ? offsets ? radio altimeter usage and awareness; and ? a discussion of possible risk factors including conditions that will dictate a go-around. Ok in the event of a missed approach we＇ll climb straight ahead to 1,800 feet, climbing right turn to 4,000...A number of specific items must be a part of the approach briefing. As previously reviewed, the crew must discuss, plan and prepare for the possibility of a go-around. The briefing should include a discussion of the use of all available navigation and approach aids appropriate to the approach being flown. A discussion of the use of the radio altimeter should also be a part of the briefing.4. Which altitude is compulsory during the approach briefing according to the Flight Safety Foundation?
One key Standard Operating Procedure is the Approach Briefing. All crew members must understand what is planned for on the approach and must be involved during the discussion of the plan. Both horizontal and vertical position awareness elements need to be established. The Flight Safety Foundation recommends that in addition to the standard briefing items such as: ? chart date ? runway in use ? approach type ? glideslope angle and ? crossing altitudesThe following items should be briefed as appropriate: ? automation setup and usage ? navigation equipment setup and monitoring ? rate and angle of descent ? intermediate altitudes and call outs ? altitude alert settings and acknowledgements ? approach gates ? timing ? runway environment ? lighting ? expectations when going visual to include: ? offsets ? radio altimeter usage and awareness; and ? a discussion of possible risk factors including conditions that will dictate a go-around. Ok in the event of a missed approach we＇ll climb straight ahead to 1,800 feet, climbing right turn to 4,000...A number of specific items must be a part of the approach briefing. As previously reviewed, the crew must discuss, plan and prepare for the possibility of a go-around. The briefing should include a discussion of the use of all available navigation and approach aids appropriate to the approach being flown. A discussion of the use of the radio altimeter should also be a part of the briefing.3. Which item is not recommended in the Approach Briefing?
One key Standard Operating Procedure is the Approach Briefing. All crew members must understand what is planned for on the approach and must be involved during the discussion of the plan. Both horizontal and vertical position awareness elements need to be established. The Flight Safety Foundation recommends that in addition to the standard briefing items such as: ? chart date ? runway in use ? approach type ? glideslope angle and ? crossing altitudesThe following items should be briefed as appropriate: ? automation setup and usage ? navigation equipment setup and monitoring ? rate and angle of descent ? intermediate altitudes and call outs ? altitude alert settings and acknowledgements ? approach gates ? timing ? runway environment ? lighting ? expectations when going visual to include: ? offsets ? radio altimeter usage and awareness; and ? a discussion of possible risk factors including conditions that will dictate a go-around. Ok in the event of a missed approach we＇ll climb straight ahead to 1,800 feet, climbing right turn to 4,000...A number of specific items must be a part of the approach briefing. As previously reviewed, the crew must discuss, plan and prepare for the possibility of a go-around. The briefing should include a discussion of the use of all available navigation and approach aids appropriate to the approach being flown. A discussion of the use of the radio altimeter should also be a part of the briefing.2.What does conditions that will dictate a go-around mean?
One key Standard Operating Procedure is the Approach Briefing. All crew members must understand what is planned for on the approach and must be involved during the discussion of the plan. Both horizontal and vertical position awareness elements need to be established. The Flight Safety Foundation recommends that in addition to the standard briefing items such as: ? chart date ? runway in use ? approach type ? glideslope angle and ? crossing altitudesThe following items should be briefed as appropriate: ? automation setup and usage ? navigation equipment setup and monitoring ? rate and angle of descent ? intermediate altitudes and call outs ? altitude alert settings and acknowledgements ? approach gates ? timing ? runway environment ? lighting ? expectations when going visual to include: ? offsets ? radio altimeter usage and awareness; and ? a discussion of possible risk factors including conditions that will dictate a go-around. Ok in the event of a missed approach we＇ll climb straight ahead to 1,800 feet, climbing right turn to 4,000...A number of specific items must be a part of the approach briefing. As previously reviewed, the crew must discuss, plan and prepare for the possibility of a go-around. The briefing should include a discussion of the use of all available navigation and approach aids appropriate to the approach being flown. A discussion of the use of the radio altimeter should also be a part of the briefing.1. What is the passage mainly about?
The following parameters have been recommended by The Flight Safety Foundation to define a stabilized approach. They should be met by 1,000 feet above touchdown in IMC conditions. ? The aircraft is on the correct flight path. ? Only small changes in heading and pitch are required to maintain the flight path. ? The speed of the aircraft is not more that Vref + 20 knots indicated airspeed and not less than Vref. ? The sink rate is no more than 1,000 feet per minute. ? The aircraft is in the proper approach and landing configuration. ? The power setting is no lower than the minimum specified for the type of aircraft. ? All briefings and checklists have been performed. All of these approach parameters must be met by 500 feet, including visual approaches. If your Standard Operating Procedures do not include parameters for a stabilized approach, The Flight Safety Foundation recommends that you use the parameters just listed. In a situation where you are unsure of your position such as an unexpected radio altimeter reading (in other words, a radio altimeter reading that is surprising or that does not agree with the pilots＇ expectations), a go-around should be called for. Always check altitude against range. ? You should not see radar altitudes less than 1,000 feet while on an instrument approach prior to (＇prior to＇ = before) the initial fix. ? You should never see radar altitudes of less than 500 feet between the initial fix and final approach fix. ? You should never see less than 250 feet past the final approach fix unless you are on an approach with lower minimums or until going visual. Pre-planning and a good approach briefing will allow you to make a timely go-around decision when ? weather is having a significant impact such as the loss of visual reference, or ? there is a significant cross wind, head wind, tail wind or wind shear.5. The phrase always check altitude against range means （ ）.
The following parameters have been recommended by The Flight Safety Foundation to define a stabilized approach. They should be met by 1,000 feet above touchdown in IMC conditions. ? The aircraft is on the correct flight path. ? Only small changes in heading and pitch are required to maintain the flight path. ? The speed of the aircraft is not more that Vref + 20 knots indicated airspeed and not less than Vref. ? The sink rate is no more than 1,000 feet per minute. ? The aircraft is in the proper approach and landing configuration. ? The power setting is no lower than the minimum specified for the type of aircraft. ? All briefings and checklists have been performed. All of these approach parameters must be met by 500 feet, including visual approaches. If your Standard Operating Procedures do not include parameters for a stabilized approach, The Flight Safety Foundation recommends that you use the parameters just listed. In a situation where you are unsure of your position such as an unexpected radio altimeter reading (in other words, a radio altimeter reading that is surprising or that does not agree with the pilots＇ expectations), a go-around should be called for. Always check altitude against range. ? You should not see radar altitudes less than 1,000 feet while on an instrument approach prior to (＇prior to＇ = before) the initial fix. ? You should never see radar altitudes of less than 500 feet between the initial fix and final approach fix. ? You should never see less than 250 feet past the final approach fix unless you are on an approach with lower minimums or until going visual. Pre-planning and a good approach briefing will allow you to make a timely go-around decision when ? weather is having a significant impact such as the loss of visual reference, or ? there is a significant cross wind, head wind, tail wind or wind shear.4. What is the meaning of prior to?
The following parameters have been recommended by The Flight Safety Foundation to define a stabilized approach. They should be met by 1,000 feet above touchdown in IMC conditions. ? The aircraft is on the correct flight path. ? Only small changes in heading and pitch are required to maintain the flight path. ? The speed of the aircraft is not more that Vref + 20 knots indicated airspeed and not less than Vref. ? The sink rate is no more than 1,000 feet per minute. ? The aircraft is in the proper approach and landing configuration. ? The power setting is no lower than the minimum specified for the type of aircraft. ? All briefings and checklists have been performed. All of these approach parameters must be met by 500 feet, including visual approaches. If your Standard Operating Procedures do not include parameters for a stabilized approach, The Flight Safety Foundation recommends that you use the parameters just listed. In a situation where you are unsure of your position such as an unexpected radio altimeter reading (in other words, a radio altimeter reading that is surprising or that does not agree with the pilots＇ expectations), a go-around should be called for. Always check altitude against range. ? You should not see radar altitudes less than 1,000 feet while on an instrument approach prior to (＇prior to＇ = before) the initial fix. ? You should never see radar altitudes of less than 500 feet between the initial fix and final approach fix. ? You should never see less than 250 feet past the final approach fix unless you are on an approach with lower minimums or until going visual. Pre-planning and a good approach briefing will allow you to make a timely go-around decision when ? weather is having a significant impact such as the loss of visual reference, or ? there is a significant cross wind, head wind, tail wind or wind shear.3. What is the meaning of power setting?
The following parameters have been recommended by The Flight Safety Foundation to define a stabilized approach. They should be met by 1,000 feet above touchdown in IMC conditions. ? The aircraft is on the correct flight path. ? Only small changes in heading and pitch are required to maintain the flight path. ? The speed of the aircraft is not more that Vref + 20 knots indicated airspeed and not less than Vref. ? The sink rate is no more than 1,000 feet per minute. ? The aircraft is in the proper approach and landing configuration. ? The power setting is no lower than the minimum specified for the type of aircraft. ? All briefings and checklists have been performed. All of these approach parameters must be met by 500 feet, including visual approaches. If your Standard Operating Procedures do not include parameters for a stabilized approach, The Flight Safety Foundation recommends that you use the parameters just listed. In a situation where you are unsure of your position such as an unexpected radio altimeter reading (in other words, a radio altimeter reading that is surprising or that does not agree with the pilots＇ expectations), a go-around should be called for. Always check altitude against range. ? You should not see radar altitudes less than 1,000 feet while on an instrument approach prior to (＇prior to＇ = before) the initial fix. ? You should never see radar altitudes of less than 500 feet between the initial fix and final approach fix. ? You should never see less than 250 feet past the final approach fix unless you are on an approach with lower minimums or until going visual. Pre-planning and a good approach briefing will allow you to make a timely go-around decision when ? weather is having a significant impact such as the loss of visual reference, or ? there is a significant cross wind, head wind, tail wind or wind shear.2. According to the paragraph, which of the following is true?
The following parameters have been recommended by The Flight Safety Foundation to define a stabilized approach. They should be met by 1,000 feet above touchdown in IMC conditions. ? The aircraft is on the correct flight path. ? Only small changes in heading and pitch are required to maintain the flight path. ? The speed of the aircraft is not more that Vref + 20 knots indicated airspeed and not less than Vref. ? The sink rate is no more than 1,000 feet per minute. ? The aircraft is in the proper approach and landing configuration. ? The power setting is no lower than the minimum specified for the type of aircraft. ? All briefings and checklists have been performed. All of these approach parameters must be met by 500 feet, including visual approaches. If your Standard Operating Procedures do not include parameters for a stabilized approach, The Flight Safety Foundation recommends that you use the parameters just listed. In a situation where you are unsure of your position such as an unexpected radio altimeter reading (in other words, a radio altimeter reading that is surprising or that does not agree with the pilots＇ expectations), a go-around should be called for. Always check altitude against range. ? You should not see radar altitudes less than 1,000 feet while on an instrument approach prior to (＇prior to＇ = before) the initial fix. ? You should never see radar altitudes of less than 500 feet between the initial fix and final approach fix. ? You should never see less than 250 feet past the final approach fix unless you are on an approach with lower minimums or until going visual. Pre-planning and a good approach briefing will allow you to make a timely go-around decision when ? weather is having a significant impact such as the loss of visual reference, or ? there is a significant cross wind, head wind, tail wind or wind shear.1. What dose parameters mean in the first paragraph?
Being go-around-prepared and go-around-minded are very important, because a go-around does not happen very often. Most important is being prepared to abandon the approach if the weather is below minimums or the approach is not stabilized. The chain of events leading to a go-around can begin at the top of descent, so the following recommendations begin with your preparation for the descent. (1) GENERAL Being go-around-prepared and go-around-minded means the following: ? You know the correct briefings, standard calls, the correct order of actions, task-sharing and cross-checking. ? You should be ready to abandon the approach if the weather is below minimums or the approach is not stabilized. ? If there is any question about the position of the aircraft, you should abandon the approach. ? After the go-around is initiated, the flight crew must fly the published missed approach procedure. (2) OPERATIONAL RECOMMENDATIONS Descent Preparation: Preparation for the descent and the approach briefing should be done early to prevent a late or rushed descent. Approach Briefing: To be go-around-prepared, the approach briefing should include a discussion of the main elements of the go-around maneuver and the published missed approach procedure. (3) THE CORRECT AIRCRAFT CONFIGURATION The flight crew must stay ahead of the aircraft throughout the flight. Any sign that there is a problem should call for immediate corrective action or the decision to go around. (4) FINAL APPROACH The crew should review the main parts of the go-around maneuver and the missed approach procedure at an appropriate time during final approach. (5) TRANSITIONING BACK TO INSTRUMENT FLYING One of the most frequent reasons for conducting a go-around is weather. If a go-around is initiated, an immediate transition to instrument flying should occur.5. When the crew should review the main parts of the go-around maneuver and the missed approach procedure, controllers should （ ）.
