Which computers process the yaw damper order, if the autopilot is not engaged?

A. On the torque shafts.

B. On the actuators.

C. On the PCU output shaft.

A. By operating the outer control handle.

B. By retracting the latch pin.

C. By setting the desarming control handle to DISARMED.

A. Must be manually switched OFF.

B. Stop automatically and wing tank pumps start running.

C. Stop automatically.

A. The door still latch.

B. The XY-single latch 32.

C. The fixed YZ latch.

A. Switch over to0 the other channel.

B. Control goes to a fail-safe position.

C. The channel in control supplies the winding of the other channel.

A. Only on the NDs.

B. On the PFDs and the NDs.

C. On the Upper ECAM DU.

A. As soon as at least one AP is engaged.

B. As soon as A/THR is engaged.

C. As soon as electrical power is available.

A. The flow control valve

B. The bypass valve

C. The anti-ice valve

A. Speeds up the alignment process of the three Inertial Reference Systems.

B. Initializes the alignment process of the three Inertial Reference Systems.

C. Completes the alignment process of the three Intertial Reference Systems using the coordinates of the origin airport.

A. The TLA

B. The ground logic

C. The N2