A、On the indicator on the water service panel only.
B、On the FAP only.
C、On the indicator on the water service panel and on the FAP.
答案:C
A、On the indicator on the water service panel only.
B、On the FAP only.
C、On the indicator on the water service panel and on the FAP.
答案:C
A. DC BUS 1 or batteries.
B. DC BUS 1, DC BUS 2 or batteries.
C. DC BUS 2 or batteries.
A. When the APU is shut down.
B. When the fault is detected.
C. Both.
A. It sends a signal to the ECU.
B. It provides a warning to the ECAM system.
C. It operates a visual indicator for ground inspection.
A. Using ADMs which convert pressure into digital format.
B. Directly with total and static pressures .
C. Directly with digital format.
A. In case of FCA1(2) failure.
B. In case of FAC1(2) pushbutton is pressed in and FAC1(2) is not energized.
C. When the FAC1(2) pushbutton is released out.
A. ELACs and SECs
B. ELACs,SECs and FACs
C. FACs
A. Ground spoilers armed and both throttles at idle or one throttle at reverse and the other one at not more than idle.
B. Ground spoilers not armed and both throttles at idle .
C. Both throttles at idle only.
A. The door still latch.
B. The XY-single latch 32.
C. The fixed YZ latch.
A. THE EIU
B. The Thrust Lever Angle.
C. The engine thrust rating.
A. Switch over to the other channel.
B. Control goes to a fail-safe position.
C. The channel in control uses values from the other channel.