Which ILS receiver provides the Ground Proximity Warning Computer with data ?

A. AC ESS BUS.

B. DC BAT BUS.

C. CSM / G .

A. By means of solenoid and a stepper motor

B. By means of a torque motor and a solenoid

C. By means of an electrical motor

A. To change the pressure voltage into a frequency signal.

B. To transmit the tire pressure signal from the wheel to the axle.将轮胎压力信号从轮子传递到轴

C. To perform the permanent test of the system.

A. During main engine start only.

B. In all modes of operation.

C. Never, it＇s a shutoff valve.

A. Feedback

B. Master DSDL

C. Message Data bus

A. To enable the received audio signals to be selected.

B. To enable the received audio signals and the frequencies to be selected.

C. To enable the frequencies of all the radio communication systems to be selected.

A. Connected by ARINC buses to exchange distance data.

B. Connected by a suppressor coaxial which transmits an analog signal preventing simultaneous transmission.

C. Not connected.

A. Only the LAST LEG ECAM REPORT.

B. The LAST LEG ECAM REPORT and the LAST LEG REPORT.

C. Only the LAST LEG REPORT.

A. The N1 limit.

B. The N1 command.

C. The N1 target.

A. 41 736 lbs (18932 kg),

B. 45 920 lbs (20872 kg),

C. 52 174 lbs (23715 kg),