It includes items such as ignition harness, high tension leads, coils as used in "low tension" systems, spark plugs, igniters, etc.

Adjust the gyro accurately.

Turn the shaft around its axis.

Do not make a recess of more than 5 mm for the studs.

Mix the material with a spatula.

Remove the pin before you turn the pulley.

To prevent unwanted friction, polish the surface.

Use an oil can to lubricate the turnbuckle.

All persons in this area must use a respirator.

Wind the tape on the reel.

Solvent that stays on the part can cause corrosion.