All flow control devices, such as check valves, fuel pumps, accumulators, should be included.

If there is no hydraulic power to extend the nose gear, the weight of the gear and the airstream pushes the nose gear into the extended position.

Move the seat forward or aft approximately 0.50 in. (12.70 mm) to align the flanges on the seat track fittings with the holes in the seat tracks.

Overhaul of propellers must be accomplished in a qualified shop in accordance with data supplied by the propeller manufacturer.

The generators supply a three-phase voltage. The frequency of this voltage increases when the generator rotor speed increases.

Handbooks shall be readily revisable. They may be in loose-leaf form, with durable, multi-ring cover, or permanently bound.

In the event a page must be added after the initial printing, use the number of the preceding page with a letter suffix added for the added page(s) (e.g., Page 1-6A, 1-6B,etc.).

The inspection/check portion shall provide information and procedure necessary to gain access to and inspection or check of a system, a unit, or an area.

Any adjustments/tests that are necessary as part of installation or reactivation procedures shall be in the text in proper sequence.

Maximum Landing Gear Extended Speed is the maximum speed at which an aircraft can be safely flown with the landing gear extended.

Atmospheric conditions, including large supercooled water droplets, freezing rain or a mixture of conditions, may exceed the FAR parameters and the capabilities of the certified ice protection system.