When you apply hydraulic pressure, make sure that the lever does not touch the stop (1).

The fueling hose must not hit the edge of the tank.

Support struts hold the floor structure in position.

Bleed the system before you disconnect the components.

Fuel leaks can decrease engine performance.

Discard all seals which are unsatisfactorily bonded.

At approximately 300 knots, the light comes on.

To get the correct value, set the switch to position 2.

Write the temperature on the engine record card.

Make sure that the airflow is not more than 10 liters/minute.

If you shake the solution, do not use it for one hour.