You can replace a large number of units during engine installation.

Safety the clamp block across the control lever forks with safety wire.

The precision of the adjustment can change.

These ALIs are mandatory and cannot be changed or deleted without the approval of the FAA office that is responsible for the airplane model Type Certificate, or applicable regulatory agency.

Revisions, additions and deletions shall be identified by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.

This method is recommended as minimizing errors of distribution, and also informs owners of the availability of systems and equipment.

The airplane general arrangement shall be illustrated with a scale line drawing consisting of plan, side and front views presented in a vertical sequence upon a single page.

If bronze particles were found, repeat this full procedure (weight off wheels) within 30 days from the date of the findings.

Clean the exterior of the equipment and its mounting shelf hardware using a vacuum cleaner and brush.

Put the upper cam in the position that agrees with the mark you made at removal.

Reserve shall be computed as 45 minutes at the cruise power to be used for the flight.