Interconnects to other systems should be plainly noted.

In the description of the airplane＇s Instrument Panel, the instruments, lights, switches and controls found on the panel shall be named and their uses explained.

Generally, in describing the airplane or its system, third person wording should be used. (For example: The nose wheel is provided with a shimmy damper to keep the wheel from shimmying while rolling on the ground.)

This Section of the Pilot＇s Operating Handbook shall describe the airplane in a manner considered by the manufacturer to be most informative to the kind of pilot considered most likely to operate the airplane. The paragraph order and detail in this Section need not be followed in a Handbook.

The equipment list, shall contain all required or optional equipment installed in the particular airplane when delivered.

The manufacturer shall provide an equipment list in this Section, in a separate document appended to the Pilot＇s Operating Handbook, or as a separate document. If the equipment list is not contained in this Section, state its location.

In addition to the weight and balance loading form, the manufacturer may provide a device to be used to calculate weight and balance. Instructions for its use shall be provided.

A weight and balance loading form and an explanation of the calculation procedure shall be provided.

This paragraph describes the procedures to calculate weight and moment for various phases of a planned flight and to ensure that the center of gravity is within approved limits.

Explain how to maintain this record when changes to the weight or moments of the airplane are made so that accurate starting data is available to calculate the weight and C.G. during normal operation of the airplane.

INSPECTION PROCEDURE sets forth the inspection procedure(s) to be utilized, such as magnetic particle, visual, etc, and may reference another document for the actual procedure, such as a nondestructive testing manual.