相关题目
Overhaul of any or all components in this chapter must be accomplished in a qualified shop in accordance with data supplied by the component manufacturer.
You should pay attention to precautions and limitations such as use of landing gear and control surface locks, minimum turning radius, maximum towing and pushing loads on nose landing gear, etc.
This Section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure required for type certification.
The corrective action prescribed by the AD, such as an inspection, repair, or modification, may be detailed in the AD itself or may be contained in another document, such as a manufacturer＇s Service Bulletin, which is referenced in the AD.
It should contain all necessary information to perform proficiency tests to maintain system or unit reliability at an acceptable level, without reference to additional documents.
This Section of the Pilot＇s Operating Handbook shall contain the appropriate Supplements (operating information) necessary to safely and efficiently operate the airplane when equipped with the various optional system and equipment not provided with the standard airplane.
The Table of Contents required by paragraph 0.9 of this Specification may be in the form of a log (or list) of the Supplements.
The diagram shall be arranged so that the flow of the system can be traced with a minimum of effort.
Make sure that you do not connect words which are not related, because this will change the meaning of the noun cluster.
If your reader must know about a specific condition before the start of a procedure or work step, give this condition first.
