APU控制系统确保优先提供：The APU control system ensures priority is given to:

一发失效的情况下，不允许执行 RNP-APCH LNAV&VNAV进近。 Under the condition of one engine failure, it is not allowed to perform RNP-APCH LNAV&VNAV approach.

VGP 方式将在雪花点一个点时截获，与盲降 GS 方式不同。VGP mode will be captured at 1 point of snowflake, it is different from ILS GS mode.

使用VNAV模式进近时， 复飞程序（MAPt 点之后）及起飞离场程序可以使用低温修正。The cold temperature compensation is allowed for the missed approach procedure (after the MAPt point) and the take-off departure procedure, when using VNAV mode for approach.

VNAV 采用仪表进近图中对应的 LNAV&VNAV进近最低标准 DA。VNAV adopts the corresponding LNAV&VNAV approach minimum standard DA.

在RNP进近中，无论何时，当出现下列哪些情况时，必须中断进近。（ ）During the approach, whenever which of the following cases appear, the approach must be aborted?

执行RNP-APCH进近所需的设备清单有哪些？（ ）what are on the List of equipment required for RNP-APCH approach?

RNP进近检查，ANP精度应（ ）。For RNP approach check, the ANP accuracy shall be ( ).

LNAV采用DDA标准，MDA+（ ）。LNAV adopts DDA standard, MDA + ( ).

在什么位置应该证实GPS APPR信息（ ）Where shall the GPS APPR message be confirmed?

VNAV模式，APPR预位应在截获航图指定FAF点高度后，到达FAF点之前。VNAV mode, the APPR shall be armed after intercepting the navigation chart designated FAF altitude, before reaching the FAF.