A、 When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.
B、 If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.
C、 Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.
答案:A
A、 When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.
B、 If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.
C、 Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.
答案:A
A. 在APU运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B. 在APU运转过程中,检查滑油温度传感器的滑油渗漏程度。
C. 在APU运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
A. 供给系统有这些用处。
B. 分散系统有这些功能。
C. 分配系统有这些功能。
A. The General Aviation Manufacturers Association compiled this specification to guide the manufacturers of the aircraft ,engine and component developing their Continuous Airworthiness Program Inspection Documents.
B. The Continuous Airworthiness Program Inspection Documents prepared by the manufacturers of the aircraft ,engine and component was guided by the General Aviation Manufacturers Association.
C. This specification was developed by the General Aviation Manufacturers Association as guidance for airplanes, engine and component manufacturers in preparing Continuing Airworthiness Program Inspection Documents .
A. System test is normally used at minor maintenance time.
B. System test is usually done during maintenance and repairs.
C. System test is normally used at major maintenance periods.
A. The selection of data by manual producers which are included in this section shall be restrained by the concepts contained in the preface of this specification.
B. The selection of data by manual producers included in this section shall be governed by the concepts contained in the preamble to this specification.
C. In this selection, the producer's choice of data should be bound by concepts contained in the preamble of this specification.
A. Detection is that portion of the fire protection system which is used to sense and indicate the presence of overheat, smoke, or fire, if furnished as manufacturer-designated standard equipment.
B. If specified as standard equipment by the manufacturer, such equipment is that portion of the fire protection system. Detection equipment includes systems for transmitting and indicating conditions of overheating, smoke or fire.
C. If the equipment is part of a fire protection system and is designated as standard equipment by the manufacturer, the detection equipment includes the sensing and indication of overheat, smoke or fire.
A. That portion of the system is used to perform the cranking portion of the starting operation.
B. That portion of the system is used to perform the igniting portion of the starting operation.
C. That portion of the system is used to perform the cranking portion of the igniting operation.
A. When the required maintenance procedure is not very long and fairly simple, the above combination can be grouped under a title which is called maintenance practice.
B. When the required maintenance procedure is not lengthy and is relatively simple, a combination of the above may be grouped under one heading and called maintenance practices.
C. When the required maintenance procedures are not very long and comparatively simple, the above combinations can be bound under one subject, calling maintenance practices.
A. 排气系统指将发动机废气导出机外的装置和组件。
B. 噪声抑制装置是指系统中降低排气噪声的部分。
C. 排气系统指将发动机废气导出机外的装置和组件。
A. 为防止系统出现事故,安装安全锁。
B. 为防止系统意外运行,安装安全锁。
C. 安全锁定系统,以防止系统意外操作。